GE Industrial Solutions EPM1500 Single Point Submetering System - Manual (Page 5)

EPM 1500 SUB-METER – INSTRUCTION MANUAL 1–1
EPM 1 500 Single Point
Submetering System
Chapter 1: Overview
GE Energy
Industrial Solutions
Overview
1.1 Getting Started
1.1.1 Description
Thank you for purchasing the GE Energy EPM 1500 sub-meter to monitor energy for your
residential, commercial, or industrial applications. At GE Energy, we pride ourselves by
providing our customers with best-in-class products, which have been carefully selected
by GE to best serve your solution needs.
The EPM 1500 is sold in KWh or Demand meter versions and is available for 120/208V and
277/480V applications. An integrated liquid crystal display (LCD) is standard on all versions,
providing local access to real-time and historical data. The meter provides two standard
communication modes: power line communications (PLC), which utilizes existing AC power
lines as the communication medium, eliminating dedicated wiring, and Modbus (RS232,
RS485, modem).
The EPM 1500 is packaged with either solid or split core CTs in various amperages to suit
both new construction and retrofit applications.
Note The EPM 1500 is primarily used for commercial and industrial applications and is available
in voltages ranging from 120 to 600 V in both wye and delta forms. The following
installation instructions are applicable to the EPM 1500 meter only.
1.1.2 Contact Information
For assistance and contact information in connection with meter internal program setup
and configuration please contact GE Energy.