0 drive parameters – GE Industrial Solutions 6KCV300lNS User Manual
Page 12
GEI- 100445
5.0 DRIVE PARAMETERS
The user parameters have an Offset referred to the type of drive linked to Interbus-S; in order to obtain the
parameter index, the specific Offset for that drive has to be added to the index of the drive parameter.
At present the Offsets are the following:
DRIVE
OFFSET (in
hexadecimal)
A V 3 0 0
2 0 0 0 h e x
D V 3 0 0
2 0 0 0 h e x
Example:
The DV300 drive parameter having the index
(which corresponds to 15 decimal) with InterBus-S has
the index 200Fhex.
The Drivecom parameters start with the index
6000h (hexadecimal); for their indexes see paragraph
5.2.1.1.4.2 of the manual
PROFILE 21.
The Drivecom parameters for the configuration of the process data channels
6001 h and 6002h are
implemented on all the cards in order to allow the configuration of the above-mentioned channels, which are
later described.
All the drive parameters can be transmitted through the PCP; as for the meaning of the parameters see the
drive manual.
,