GE Industrial Solutions 6KCV300lNS - Manual (Page 22)

6.1.3 PDC Output Enable
GEI- 100445
Each Bit of the communication object Output is assigned to a Byte of the Process Data
Channel.
Therefore, the following assignment must be taken into consideration :
Bit = 0 The corresponding value of the process data is disabled.
Bit The corresponding value of the process data is enabled.
If a drive parameter occupies more than one Byte, the Bit considered is the one assigned to the parameter.
Description of the object Output
OBJECT ATTRIBUTE I VALUE I MEANING
Index 6002h
Object code 07
Index of the data Type 20
PDC Output Enable
Single variable
Octet string: manufacterer specific, it
depends on the width of the PDC
Length On n Byte: manufacterer specific; it
depends on the width of the PDC
Password 00
I
Non-existing
Access Group 00
I
Non-existing
Access Rights 03 Read-Ail,
Write-All
Local Address x x x x