Xylem CVD-2000 CELLULAR AUTODIALERS - Manual (Page 10)

Global Water
800-876-1172
• globalw.com
- 10 -
PROGRAMMED IN.
If you pressed “1 ” to program in a numeric page :
(a) Press the digits of the pager to be called. The numbers will appear on
the LCD, as will the following key designations.
(b) Press “P” one or more times in accordance with the number of
seconds needed to accommodate the pager.
(Remember, each “P” provides a 2-second pause).
(c) Press the digits of the numeric pager code.
NOTE: SOME PAGER SERVICES REQUIRE A “#” SIGN FOR
SEPARATION OF THE NUMERIC CODE OR AT THE END OF
THE NUMERIC CODE FOR PROPER TRANSMISSION.
(d) Press “*” to store the sequence.
Example: To store numeric pager number 555-1212, a 4-second
Pause and code 3456:
(e) Press:
4. STEP 3B – TELEPHONE NUMBERS
If you pressed “2” and wish to program in a telephone number:
(a) Press the digits of the number to be dialed. For long-distance
numbers, first press “1” followed by the area code and then the
number. The number will appear on the LCD.
(b) Press “*” to store the sequence.
Example: Store telephone number 1-800-555-1212:
(c) Press:
REMEMBER/NOTE: Before programming your dialer to call the
police, fire department 0r 9-1-1 directly, you must check with these
agencies for their approval.
5. STEP 3C – VOICE PAGERS
If you pressed “2” and wish to program in a voice pager:
(a) Press the digits of the pager to be called.
(b) Press “P” one or more times in accordance with the number of
seconds needed to accommodate the pager.
(Remember each “P” provides a 2-second pause).
(c) Press “*” to store the sequence. The number will appear on the LCD.
Example: To store voice pager 555-1212 and a 4-second pause:
(d) Press: