Xylem CVD-2000 CELLULAR AUTODIALERS - Manual (Page 8)

Global Water
800-876-1172
• globalw.com
- 8 -
VI) Programming the Dialer
a) Overview
Please study this section thoroughly before beginning to program the dialer,
referring to the Sample Program Planner on page 20. Then, select from among the
options for each feature, listing each choice in pencil on the blank Program
Planner on page 23. Once the dialer is correctly programmed, list each choice in
ink. One copy of the Planner should be kept by the installer; one copy should
remain with the end user.
A look at the keypad:
CALLOUT FOR NUMERALS:
Press these keys to enter telephone numbers and other
programming information as specified in this manual. A
maximum of 50 digits can be input in each phone/pager
location.
CALLOUT FOR P:
Press this key to program in a pause. Each “P” provides
a 2-second pause.
CALLOUT FOR R:
Press this key to record the combination of identification
and directional outgoing messages (OGMs). The total
elapsed OGM time cannot exceed 51 seconds.
CALLOUT FOR M:
Press this key to change the Mode of the dialer, in
sequence: PROGRAM TEST OPERATE OFF.
Once the unit has been programmed, removing power or placing the dialer in the
OFF mode will not affect the programming.