Xylem CVD-2000 CELLULAR AUTODIALERS - Manual (Page 14)

Global Water
800-876-1172
• globalw.com
- 14 -
(a) The word RECORD will appear in the upper left corner of the LCD,
above the instruction: PRESS R. The option selected will appear in
the upper right corner. For instance, if you selected option #2, the
LCD will read:
RECORD OGM1
PRESS R
(b) Speak 6-12 inches away from the microphone. Referring to your
script and speaking in a normal voice, press and hold R (the word
RECORDING will be displayed), releasing the key after you have
completed enunciating your messages. The word DONE will appear
on the LCD when the maximum allotted time has been reached.
(c) The LCD will read: PLAY OGM(S)
1(YES) 2(NO)
Press “1” to play back your recording
(d) The LCD will read: ACCEPT
1(YES) 2(NO)
Press “1” to accept the recorded OGM(s). Press “2” if you wish to
re-record the messages, beginning with Step 4.
e) Changing The OGMs
After your system is up and operating, you may change one or more of the
recorded OGMs and/or choose a completely different option. To do so, simply
scroll to the programming section on your display:
PROGRAM: OGMS
1(YES) 2(NO)
Select the option, then begin again from Step 3 above to record your new
message(s).
f) Programming The Channels
The AD200-4 is designed to be adaptable to a complete range of personalized
applications. Each of the four input channels can be programmed individually for
full system customization. In addition to setting enable/disable options, entry/exit
delays and type of activation (N.O., N.C., & momentary or continuous), each user
can specify which emergency messages will be delivered and which numbers will
be dialed. The first channel activated will be the priority channel. Numbers
programmed to that channel will be completed before the dialer moves on to the
next channel(s). Although comprehensive in scope, the system is easy to program.
Just follow these simple steps.
1. STEP 1
(a) The LCD will read: PROGRAM: CHANNELS
1(YES) 2(NO)
(b) Press “1” to begin programming the channels.