2 creating a new configuration – Xylem ProLab 3000 LABORATORY pH METER User Manual
Page 160
Configurations
ProLab 3000
160
ba75645e02
01/2010
13.2
Creating a new configuration
When creating a configuration, the current settings of the meter for
each measured parameter are taken over in the Configuration window
first. Then the settings can be adjusted and stored as an extra configu-
ration file.
1
Open the menu, File / New configuration....
The Configuration window appears.
2
Define the options for allowed measurements for all measured
parameters.
3
Using [Save], open the Save file dialog.
4
Enter a new file name and confirm with [OK].
The configuration is stored.
5
If required, output the settings to the interface with [Print].
6
If necessary, store further configurations.
7
Close the Configuration window with [Terminate].
Note
To activate the settings of a configuration, the configuration has to be
loaded (see page 161).