Xylem ProLab 3000 LABORATORY pH METER - Manual (Page 161)

ProLab 3000 Configurations
161 ba75645e02 01/2010
13.3 Loading a configuration
All users who can create a configuration can also load it.
When loading a configuration, all settings stored in the configuration file
can be loaded.
1 Open the File menu with Select configuration....
The Open file dialog box pops up.
2 Select a configuration file ("*.ste") and confirm with [OK].
The Configuration window pops up.
3 The configuration for all measured parameters can be viewed
but not changed.
4 If required, output the settings to the interface with [Print].
5 Load the configuration with [OK].
The settings stored in the configuration are active.
6 Close the Configuration window with [Terminate].