Extron Electronics IPCP 505 User Guide - Manual (Page 47)

IPCP 505 • Software-based Configuration and Control 41
IR Drivers
Once the IPCP 505 is configured and IR drivers have been uploaded to the unit and linked
to specific IR ports, you can view a list of the uploaded drivers using this page. Click on the name
of the driver file to switch to a view of the commands loaded for that driver. Clicking on a port
and then a command name makes the IPCP send that command out its linked IR port to the
connected device.
Passwords
In the Passwords page you can change the administrator and/or user passwords.
Figure 30. A Passwords Embedded Web Page
NOTES:
• Passwords must contain 4 to 12 alphanumeric characters. Symbols and spaces
are not allowed, and the passwords are case sensitive. A minimum of four
characters are required when creating passwords via the web pages.
• A user password cannot be assigned if an administrator password does not exist.
• If the administrator password is cleared, the user password is also cleared.
Figure 29. An
IR Drivers
Embedded
Web Page