Command/response table for sis commands, Serial port configuration and use, Command/response table for – Extron Electronics IPCP 505 User Guide User Manual
Page 63: Sis commands, X@ x
IPCP 505 • SIS Pr
ogramming and Contr
ol
57
Command/Response Table for SIS Commands
Command
ASCII (Telnet)
(host to IPCP)
URL Encoded (web)
(host to IPCP)
Response
(IPCP to host)
Additional description
Serial port configuration and use
These commands apply to any port that uses RS-232 communication: both 1-way (output) and 2-way (bidirectional) RS-232 communication.
Send data string
E X!
*
X1&
*
X2)
*
X2!
RS
} X@
X!
= Specific port number (01-99):
Serial ports:
IR/serial ports:
01 = COM1 port
09 = IR/serial port 1
02 = COM2 port
10 = IR/serial port 2
03 = COM3 port
11 = IR/serial port 3
04 = COM4 port
12 = IR/serial port 4
05 = COM5 port
13 = IR/serial port 5
06 = COM6 port
14 = IR/serial port 6
07 = COM7 port
15 = IR/serial port 7
08 = COM8 port
16 = IR/serial port 8
00 = reserved or all ports
X@
= command data section (< 200 bytes).
X1&
= time in tens of ms for the IPCP to wait
until receipt of the first response character
before terminating the current receive
operation (default = 10 = 100 ms, max. =
32767). The response includes leading zeros.
X2)
= time in tens of milliseconds (ms) for
the IPCP to wait between characters being
received via a serial port before terminating
the current receive operation (default = 2
= 20 ms, max. = 32767). The response
includes leading zeros.
X2!
= #L or #D. The letter parameter is case
sensitive (requires a capital “D” or capital “L”).
The response includes leading zeros.
L indicates the length of the message to be
received.
D indicates the delimiter value that ends the
response.
# = byte count (for L) or a single ASCII
character expressed in decimal form (for D).
Byte count # can be from 0 to 32767,
default = 0. The ASCII decimal delimiter # value
can be from 0 to 00255, default = 0L.
For #L, # is a regular ASCII (character)
numeral. If the length is 50 bytes, # = 50.
For #D, # can be any character(s) or
number(s), but it is translated into decimal
format for use in the command.
Examples: A 3-byte message length = 3L.
A delimiter of $ would be entered as 36D
(36 is the decimal equivalent of the dollar
sign).
A delimiter of ASCII 0A = 10D (line feed).
W
X!
%2A
X1&
%2A
X2)
%2A
X2!
RS
| X@
response from command
]
NOTE: *
X1&
*
X2)
*
X2!
is optional.
X1&
may be omitted only if
X2)
is also missing. If these three variables are not
specified, the default values are used. For this command,
X1&
and
X2)
must both a) equal zero or
b) be nonzero, or c) both be omitted.
NOTE: For web encoding for
X@
, convert non-alphanumeric characters to hex numbers. A space (hex = 20) is
encoded as %20. A plus sign (hex = 2B) is encoded as %2B.
Example:
E
05*4*7*3L RS
}
<data>
W05%2A4%2A7%2A3L RS
|
<data>
response from command
]
NOTE: The data string (
X@
) in this RS command is limited to 200 bytes.
NOTE: Use the ASCII to decimal table below to convert the delimiter character for
X2!
when using a delimiter (D).
ASCII to Decimal Conversion Table
0
1
2
3
4
5
6
7
8
9
10
LF
CR
20
Esc
30
space !
“
#
$
%
&
’
40
(
)
*
+
,
-
.
/
0
1
50
2
3
4
5
6
7
8
9
:
;
60
<
=
>
?
@
A
B
C
D
E
70
F
G
H
I
J
K
L
M
N
O
80
P
Q
R
S
T
U
V
W
X
Y
90
Z
[
\
]
^
_
‘
a
b
c
100
d
e
f
g
h
i
j
k
l
m
110
n
o
p
q
r
s
t
u
v
w
120
x
y
z
{
|
}
~
Del
ASCII to Decimal Conversion Table
To find the decimal equivalent of the ASCII character, add
the row heading and column heading numbers together.
LF = line feed
CR = carriage return (
}
)
Esc = escape
Del = delete