Extron Electronics IPCP 505 User Guide - Manual (Page 50)

IPCP 505 • Software-based Configuration and Control 44
Figure 34. A File Management Page For a Subfolder
GlobalViewer Web Pages
Once an IPCP 505 (or other IP Link-based device) is configured using Global Configurator,
GC generates the web browser-based GlobalViewer (GV) application for that unit. Once
uploaded to the IPCP, the GlobalViewer web pages allow the user to manage, monitor, and
control the IPCP and the devices connected to it.
NOTE: To work with GlobalViewer web pages, you must use Microsoft Internet Explorer
version 6.0 or higher with ActiveX enabled.
See the Global Configurator Help file for specific information on how to use the software and
perform basic setup tasks.
NOTE: If the IPCP has been configured with passwords, the GlobalViewer web pages
are password protected. Although default embedded web pages are accessible via
the GlobalViewer web pages, non-administrators (personnel with only user access)
are able to access only the Status default web page and some GlobalViewer Control
pages.
Four screens for the IPCP are available via Global Viewer: Control, Monitor, Schedule, and
Info (
). Screens such as Monitor and
Schedule appear only for ports and controlled devices that have been included in specific
monitors or schedules that can be set up using GC. The Info screen appears for the overall
system, not for specific connected devices.
Read the Global Configurator Help file for details about each screen and how to use the
GlobalViewer pages.