Extron Electronics IPCP 505 User Guide - Manual (Page 78)

IPCP 505 • SIS Pr
ogramming and Contr
ol
72
Command/Response Table for SIS Commands (continued)
Command ASCII (Telnet)
(host to IPCP)
URL Encoded (web)
(host to IPCP)
Response
(IPCP to host)
Additional description
E-mail commands
Configure e-mail events (mailbox) 24 E X4%
,
X4^
,
X4&
CR
} X4%
= e-mail event number (1 - 64).
X4^ = e-mail recipient address (for example,
[email protected]) for the person to whom
messages will be sent. This address is limited
to 31 characters.
X4&
= name of e-mail file to be sent (1.eml,
2.eml, ... 64.eml)
(first line of the file = the subject,
the rest = the body of the e-mail).
W X4% %2C X4^ %2C X4& CR | Ipr X4% , X4^ , X4& ]
Example: E 5, [email protected], 7.eml CR } For e-mail event 5, send file 7.eml to
[email protected].
W5 %2C jdoe %40 extron %2E com %2C 7 %2E eml CR |
Ipr 5, [email protected], 7.eml
]
Read e-mail event E X4% CR } W X4% CR | X4^ , X4& ]
Send e-mail file specified in the
e-mail event configuration
24
E X4% SM } W X4% SM | Eml X4% ] X4% = e-mail event number (1 - 64).
Send a different e-mail file (one not configured for an e-mail event) or
send an e-mail file using a different e-mail address (one that has not been specified via the
CR command during e-mail configuration)
24
X4^ = e-mail recipient address, limited to
240 characters.
X7) = The number to insert into an e-mail
message if a ____.eml file has an embedded
server-side include “<!--#echo var =
“WCR|” -->” (the
E} command with no
parameters). The numeral is a 16-bit number
to be employed as the user defines.
This is an optional parameter. Use 0 as a
placeholder if the optional
X4&
variable is
used but X7) is not needed.
X4& = xxx, where xxx = a number 1 - 999
corresponding to the e-mail file name
(xxx.eml). If xxx = 0 or no parameter is
given, the unit sends the file that was set via
the CR command.
E X4^ , X4% , X7) , X4& SM }
W
X4^
%2C
X4%
%2C
X7)
%2C
X4&
SM
|
Eml X4% ]
NOTE: If file X4& .eml is not found when the SM command is executed, the IPCP sends a default e-mail message.