Extron Electronics IPCP 505 User Guide User Manual
Page 52
Advertising
IPCP 505 • Software-based Configuration and Control
46
Figure 37.
An IPCP-specific GV Control Page for Switched Power Output Ports
If a device has been set up with control drivers, click on the name of the system or on the
name of the device on the left side of the GlobalViewer window to open a Control page
that shows the available commands for all of the controlled devices or for that one specific
device. The following figure shows an example.
Figure 38.
A GlobalViewer Overall System Device Control Page
You can click the GlobalViewer on-screen buttons in the Control pages to send the
corresponding command from the IPCP to that device.
Advertising