Extron Electronics MVC 121 Plus User Guide - Manual (Page 24)

Filter Processor Block
A filter block can be configured for each MVC input. The following functions are available:
• Insert — The filter block is inserted and made active by right-clicking on the block
and selecting from the context menu or by double-clicking and entering selections.
• Remove a filter — An active filter can be removed by right-clicking on the block and
selecting
Delete or by selecting the block and pressing <delete> on the keyboard.
This sets the parameters back to default and bypasses the block.
• Bypass — When bypass is active, signal flow passes through the filter block without
processing, regardless of the settings. When bypass is removed, the signal will be
processed according to the filter settings. A red mark appears in the lower left of the
block (shown below) to indicate it has been inserted, but is currently bypassed.
Filter
MIc/line inputs 1 and 2 allow a total of five filters per input. Line input 3 allows up to three
filters.
The first filter is inserted from a processor list that appears when the block is
double-clicked or via a context window/processor list when the block is right-clicked.
After the processor is inserted, a double-click opens the setup dialog box.
MVC 121 Plus • Operation 18