Extron Electronics MVC 121 Plus User Guide - Manual (Page 32)

In the example below, input audio from Mic/Line Input #1 is processed then arrives at the
mix-point and is routed to the stereo output bus.
Figure 15. Input 1 to Mix-point
A double-click on the mix-point opens the dialog box, as shown on the right of the above
diagram. When the mute button is released on Input #1 of the mix-point (shown above),
the mix junction turns teal with a light green circle to indicate the open mix-point dialog
box is the focus, and the signal is routed to Outputs, both variable and fixed.
Double-click on the Volume control block to adjust the variable output from 0 dB to
-100 dB with a step resolution of 1 dB (see the following volume control) dialog box.
MVC 121 Plus • Operation 26