Extron Electronics MVC 121 Plus User Guide - Manual (Page 53)

6 6
7
8
5a
5b
-or-
Figure 26. Selecting Live Mode, continued
6. Click OK . The program prompts to save the current configuration.
• If Pull is selected, the program updates the currently open file with the
configuration from the device. Proceed to step 7.
• If Push is selected, the program overwrites the device configuration with the
currently open file . Proceed to step 8.
NOTE: In either case, the program and device configuration will now reflect
DSP Configurator changes in real-time.
MVC 121 Plus • Software Control 47