Setting the front panel locks (executive modes), Setting the front panel locks (executive modes), Front panel operation, cont’d – Extron Electronics MTPX Plus Series Setup Guide User Manual

Page 13

Advertising
background image

Refer also to the MTPX Plus User’s Manual at

www.extron.com

.

3-5

Refer also to the MTPX Plus User’s Manual at

www.extron.com

.

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock

that limit the operation of the switcher from the front panel. The

three levels are:

Lock mode 0 —

The front panel is completely unlocked.

Lock mode 1 —

All changes are locked from the front

panel (except for setting Lock mode 2). Some functions

can be viewed.

Lock mode 2 —

Basic functions are unlocked. Advanced

functions are locked and can be viewed only.

Basic functions consist of:

m

Making ties

m

Saving and recalling presets

m

Setting input audio gain and attenuation

m

Changing Lock modes

Advanced functions consist of:

m

Setting audio output mutes

m

Setting audio output volume

m

Setting audio/RS-232 wire pair and front panel

configuration

N

The switcher is shipped from the factory in Lock mode 2.

Selecting Lock mode 2 or toggling between

mode 2 and mode 0

N

If the switcher is in Lock mode 0 or mode 1, this procedure

selects mode 2.

If the switcher is in Lock mode 2, this procedure selects

mode 0 (unlocks the switcher).

Toggle the lock on and off by pressing and holding the Enter

button, the Video button, and the Audio button simultaneously

for approximately 2 seconds.

I / O

VIDEO AUDIO

ENTER

I / O

VIDEO

AUDIO

ENTER

Press and

hold simultaneously.

The buttons blink twice.
Release the buttons.

2 seconds

Selecting Lock mode 2 or toggling between

mode 2 and mode 1

N

If the switcher is in Lock mode 0 or mode 1, this procedure

selects mode 2.

If the switcher is in Lock mode 2, this procedure selects

mode 1.

Toggle the lock on and off by pressing and holding the Video

button and the Audio button simultaneously for approximately

2 seconds.

I / O

VIDEO AUDIO

I / O

VIDEO

AUDIO

Press and

hold

simultaneously.

The buttons blink twice.
Release the buttons.

2 seconds

= lit,

= unlit

= blinking,

= lit,

= unlit

= blinking,

MTPX Plus Series • Front Panel Operation

Front Panel Operation, cont’d

3-4

MTPX Plus Series • Front Panel Operation

Advertising