Extron Electronics MTPX Plus Series Setup Guide - Manual (Page 20)

Refer also to the
MTPX Plus User’
s Manual
at
www
.extron.com
.
Refer also to the
MTPX Plus User’
s Manual
at
www
.extron.com
.
N
X!
= Input number 01 – (maximum number of inputs for your model)
X1^
= Audio gain 0 – 24 (1 dB per step)
X1& = Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X1* = Audio attenuation 1 – 18 (1 dB per step)
N
X@ = Output number 01 – (maximum number of outputs for your model)
X1$
= Mute 0 = off (unmuted)
1 = on (muted)
X1%
= Audio or RS-232 mute: 0 = no mutes
2 = audio or RS-232 mute
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio or RS-232 mute commands
Audio or RS-232 mute X@ *1Z Amt X@ *1 ] Mute output X@ audio (audio off).
Audio or RS-232 unmute X@ *0Z Amt X@ *0 ] Unmute output X@ audio (audio on).
Read audio or RS-232 mute X@ Z X1$] 1 = mute on, 0 = mute off.
Global audio or RS-232 mute 1*Z Amt1 ] Mute all audio outputs.
Global audio or RS-232 unmute 0*Z Amt0 ] Unmute all audio outputs.
View output mutes E VM } X1% 1
, X1% 2
, ... X1% n ] Each X1% response is the mute status of an
output, starting from output 1.
n
= the maximum number of outputs for
this model.
Example: MTPX Plus 3216 E VM } Mut0220200002202000 ] Output 2, 3, 5, 10, 11, and 13 audio or
RS-232 are muted. All other outputs are
unmuted.
N The “Mut” portion of the response appears only when the switcher is in Verbose mode 1 or 3. See the Verbose mode SIS command on
page 4-14.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio input gain and attenuation
N The set gain (G) and set attenuation (g) commands are case sensitive.
Set input audio gain to +dB value X! * X1^ G In X! •Aud X1&]
Example: 1*2G In01•Aud+02 ] Set input 1 audio gain to +2 dB.
Set input audio attenuation to -dB
value X! * X1* g In X! •Aud X1&]
Increment gain X! +G In X! •Aud X1&] Increase gain by 1 dB.
Example: 5+G In05•Aud+03 ] Increase audio input 5 level from +2 dB to
+3 dB.
Decrement gain X! -G In X! •Aud X1&] Decrease gain by 1 dB.
Example: 7-G In07•Aud-09 ] Decrease audio input 7 level from -8 dB to
-9 dB.
Read input level X! G X1&]
MTPX P
lus Series • Remote Contr
o
l and Optimizing the V
ideo
Remote
Contr
ol
and
Optimizing
the
V
ideo,
cont’d
4-10
MTPX P
lus Series • Remote Contr
o
l and Optimizing the V
ideo
4-11