Extron Electronics MTPX Plus Series Setup Guide - Manual (Page 29)

Refer also to the MTPX Plus User’s Manual at www.extron.com . Refer also to the MTPX Plus User’s Manual at www.extron.com .
1 . Start the Web browser program.
2 . Click in the browser’s Address field.
3 . Enter the Matrix IP address in the browser’s Address field.
N 192.168.254.254 is the factory-specified default value for
this field.
4 . Press the keyboard Enter key. The switcher checks to see if
it is password protected.
If the switcher is not password protected , it checks and
downloads the HTML start-up page. The switcher is ready
for operation via HTML remote control.
If the switcher is password protected , it downloads the
Enter Network Password page.
N A User name entry is not required.
5 . Enter the appropriate administrator or user password in
the Password field and click OK.
6 . The switcher downloads the HTML start-up page. The
switcher is ready for operation via HTML remote control.
MTPX Plus Series • Remote Control and Optimizing the Video
Remote Control and Optimizing the Video, cont’d
4-26 MTPX Plus Series • Remote Control and Optimizing the Video 4-27