Extron Electronics MTPX Plus Series Setup Guide - Manual (Page 17)

Refer also to the
MTPX Plus User’
s Manual
at
www
.extron.com
.
Refer also to the
MTPX Plus User’
s Manual
at
www
.extron.com
.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Create ties
N • Commands can be entered back-to-back in a string, with no spaces; for example; 1*1!02*02&003*003%4*24$.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
N The & tie command for RGB and the % tie command for video can be used interchangeably.
N The & read tie command for RGB and the % read tie command for video can be used interchangeably.
Tie input to output video and
audio
X! * X@ ! Out X@ • In X! • All ] Tie the video and audio from input X! to
output X@ .
Example: 1*3! Out03•In01•All ] Tie input 1 video and audio to output 3.
Tie input to output, RGBHV video
only
X! * X@ & Out X@ • In X! • RGB ] Audio breakaway.
Example
(see second Note, above): 10*4& Out04•In10•RGB ] Tie input 10 RGB to output 4.
Tie input to output, video only X! * X@ % Out X@ • In X! • Vid ] Audio breakaway.
Example
(see 2nd Note, above) 7*5% Out05•In07•Vid ] Tie input 7 video to output 5.
Tie input to output, audio only X! * X@ $ Out X@ • In X! • Aud ] Audio breakaway.
Example: 24*04$ Out04•In24•Aud ] Tie input 24 audio to output 4.
Read RGB output tie X@ & X!] RGBHV input X! is tied to output X@ .
Read video output tie X@ % X!] Video input X! is tied to output X@ .
Read audio output tie X@ $ X!] Audio input X! is tied to output X@ .
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio/RS-232 TP input (wire pair 3 and 6) configuration
N The RS-232 output insert ports, when enabled ( EX$ *0Lrpt } ), override the audio/RS-232 TP input configurations.
Configure input as audio X! *0\ Typ X! *0 ] Define the audio/RS-232 input as audio,
such as provided by an MTP 15HD A
transmitter.
Configure input as RS-232 X! *1\ Typ X! *1 ] Define the audio/RS-232 input as
bidirectional serial communications,
such as provided by an MTP 15HD RS
transmitter.
Read TP input configuration X! \ X#] Show the audio/RS-232 wire pair input
definition.
RS-232 output inserts enables
Disable an RS-232 output insert
port EX$ *0Lrpt } Lrpt X$ *0 ] Disable the RS-232 insert on the X$ output.
Enable an RS-232 output insert port EX$ *1Lrpt } Lrpt X$ *1 ] Enable the RS-232 insert on the X$ output.
Read RS-232 output insert status EX$ Lrpt } X%] Show the status of the RS-232 output
insert.
N
X! = Input number 00 – (maximum number of inputs for your model) (00 = untied)
X@
= Output number 01 – (maximum number of outputs for your model)
N
X! = Input number 01 – (maximum number of inputs for your model)
X#
= Audio/RS-232 wire pair input type 0 = audio
1 = RS-232
X$ = RS-232 output insert port MTPX Plus 168, 816, 1616 01 – 08
MTPX Plus 1632, 3216, 3232 01 – 16
X% = RS-232 output insert status 0 = disabled
1 = enabled
Command/response table for selected SIS commands
MTPX P
lus Series • Remote Contr
o
l and Optimizing the V
ideo
Remote
Contr
ol
and
Optimizing
the
V
ideo,
cont’d
4-4
MTPX P
lus Series • Remote Contr
o
l and Optimizing the V
ideo
4-5