Extron Electronics MTPX Series User Guide - Manual (Page 113)

A-3 MTPX Twisted Pair Matrix Switchers • Reference Information
PRELIMINAR
Y
Video output — main (see receivers’ input specifications)
Number/signal type ..................... 8, 16, or 32 proprietary analog signals
Connectors ..................................... 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Sync — local inputs and outputs only
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... See receiver specifications (see specifications on Web site).
Input level ...................................... 3.5 V to 5.5 Vp-p, unterminated; 4.0 Vp-p normal
Output level ................................... See receiver specifications (see specifications on Web site).
Input impedance ........................... 573 ohms ± 5%
Output impedance ........................ 110 ohms
Max. input voltage ........................ 5.0 Vp-p
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative
Audio
Routing
MTPX 816 ........................... 8 x 16 mono matrix, 3 x 4 local
MTPX 168 ........................... 16 x 8 mono matrix, 3 x 4 local
MTPX 1616 ......................... 16 x 16 mono matrix, 3 x 4 local
MTPX 1632 ......................... 16 x 32 mono matrix, 6 x 8 local
MTPX 3216 ......................... 32 x 16 mono matrix, 6 x 8 local
MTPX 3232 ......................... 32 x 32 mono matrix, 6 x 8 local
Gain (local inputs and outputs) .. Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ...................... 20 Hz to 20 kHz, ±1 dB
THD + Noise .................................. 0.15% @ 1 kHz at nominal level
S/N .................................................. >70 dB at maximum output (unweighted)
CMRR .............................................. >43 dB @ 20 Hz to 20 kHz
Audio input — local
Number/signal type ..................... 3 or 6 stereo, balanced/unbalanced
Connectors ..................................... (3) or (6) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... >10k ohms unbalanced
Nominal level ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level .............................. +18 dBu, balanced or unbalanced at 1% THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio input — main (see transmitters’ output specifications)
Number/signal type ..................... 8, 16, or 32 proprietary analog signals
Connectors ..................................... 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Audio output — local
Number/signal type ..................... 4 or 8 dual mono, balanced/unbalanced
Connectors ..................................... (4) or (8) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±1 dB channel to channel
Maximum level (Hi-Z) ................. +18 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) ........... +15 dBm, balanced or unbalanced at 1% THD+N