Extron Electronics MTPX Series User Guide - Manual (Page 91)

4-11 MTPX Twisted Pair Matrix Switchers • Programmer’s Guide
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Resets
Reset global presets and names E
ZG
}
Zpg
] Clear all global presets and
their names.
Reset one global preset EX1$
ZG
}
Zpg
X1$]
Clear global preset
X1$
.
Reset audio input levels E
ZA
}
Zpa
] Reset all audio input levels
(gain and attenuation) to 0 dB.
Reset audio output levels E ZV } Zpv ] Reset all audio output
levels (volume) to 100% (no
attenuation).
Reset all mutes E
ZZ
}
Zpz
] Reset all video and audio
mutes.
Reset flash E ZFFF } Zpf ] Reset flash memory (erase all
user-supplied files).
Reset whole switcher E ZXXX } Zpx ] Clear all ties and presets,
reset all audio gains to 0 dB,
and reset volume to 100%.
Absolute reset E ZQQQ } Zpq ] Similar to Reset whole
switcher
, plus clear the IP
address to 192.168.254.254
and subnet mask to
255.255.000.000.
View ties, gain, volume, mutes, presets, and DIP switch status
View RGB (video) output tie X@
&
X!]
Example: 5& 12
] Input 12 video is tied to
output 5.
View video output tie X@ % X!]
Example: 7% 02
] Input 2 video is tied to output 7.
View audio output tie X@
$
X!]
Example: 3$ 06
] Input 6 audio is tied to output 3.
View output volume X(
V
X1)]
Example: 7V 55 ] Volume for output 7 is 55%.
View input gain X!
G
X1@]
Example: 4G -02 ] Gain for input 4 is -2 dB.
View output mutes E
VM
} X1^ 1 X1^ 2 ...
X1^ n ]
Each
X1^
response is the
mute status of an output,
starting from output 1.
n
= the maximum number of
outputs for this model..
Example:
MTPX 3216
E
VM
}
0220200002202000
] Output 2, 3, 5, 10, 11, and
13 audio or RS-232 are
muted. All other outputs are
unmuted.
N
X!
= Input number 00 – (maximum number of inputs for your model)
X@
= Output number 01 – (maximum number of inputs for your model)
X(
= Local audio output number 1 – 4 (matrix sizes 1616 and smaller)
1 – 8 (matrix sizes 1632 and larger)
X1)
= Volume adjustment range 0 – 64 (1 dB/step except for 0-to-1, which is 22 dB)
X1@
= Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X1^
= Mute: 0 = not muted 2 = audio mute
X1$
= Global preset # 0 - 32, 10 maximum (0 = current configuration)