Preliminar y, Operation, cont’d – Extron Electronics MTPX Series User Guide User Manual
Page 44
Operation, cont’d
MTPX Twisted Pair Matrix Switchers • Operation
3-18
PRELIMINAR
Y
3
.
To select both video and audio for viewing, if necessary, press and release the
Video button and the Audio button (figure 3-23) so that both are LEDs are lit.
VIDEO AUDIO
I/O
1
2
3
4
5
OUTPUTS
6
7
8
Until you select an input, the LEDs light for all
untied outputs or outputs with audio broken away.
Press the Audio button to
toggle on and off.
The LED lights or blinks
when selected.
In this example, the Audio LED blinks to
indicate audio breakaway (assuming you
have performed examples 1, 2, and 3).
Press the Video button to
toggle on and off.
The LED lights when
selected.
Figure 3-23 — Select video and audio
4
.
Press and release the Input 5 button (figure 3-24).
3
4
5
6
2
3
4
5
6
7
8
1
OUTPUTS
The output buttons for outputs not tied to input 5 are unlit.
The output buttons for outputs that are tied to Input 5, light.
Press and release the Input 5 button.
The LED lights.
Figure 3-24 — Select an input
N
You can also view a set of ties by selecting a tied output. To demonstrate this,
note the number of a lit output LED, and then press and release the output
button for an untied (unlit) output. Observe that all of the untied outputs’
LEDs light. Then press the output button that you noted previously and observe
that the selected output LED, the tied input LED (input 5), and the output
LEDs light for all of the outputs that are tied to the input.