Extron Electronics MTPX Series User Guide - Manual (Page 92)

Programmer’s Guide, cont’d
MTPX Twisted Pair Matrix Switchers • Programmer’s Guide 4-12
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DIP switch status (continued)
View video global preset
configuration EX1$
*
X@
*1VC
} X!
n •
X!
n +1 •...•
X!
n +15 •Vid
]
Show preset
X1$
’s video
configuration. Show the
input tied to 16 sequential
outputs, starting from output
X@
.
Command description:
Response description: preset #*starting output # (StO#)*1(=video)VC
input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#+15•Vid
]
N The starting output number ( X@ ) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX1$
*1*1VC
}
where
X1$
= 0 returns the switcher’s current video configuration.
Example: MTPX 168 E 3*1*1VC }
1 Output:
Response = tied input:
input 12 tied to output 3
2 3 4 5 6 7 8
08•08•12•08•08•11•00•00
no tied input
input 8 tied to output 4
•--•--•--•--•--•--•--•--•
13 14 15 16 09 10 11 12
outputs do not exist
•Vid
Each position shown in the response is an output: left = starting output (1), right =
starting output +15 (16). (Outputs 9 through 16 are not present on the MTPX 168.) The
number in each position is the input tied to that output.
In this example, preset 3, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to
output 3; and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.
View audio global preset
configuration EX1$
*
X@
*2VC
} X!
n •
X!
n +1 •...•
X!
n +15 •Aud
]
Show preset
X1$
’s audio
configuration. Show the
input tied to 16 sequential
outputs, starting from output
X!
.
Command description:
Response description: preset #*starting output # (StO#)*2(=audio)VC
input # (I#) tied to StO#•I# tied to StO#+1•I# tied to StO#+2• ... •I# tied to StO#15•Aud
]
N The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX1$
*1*2VC
}
where
X1$
= 0 returns the switcher’s current audio configuration.
Example: (MTPX 1632) E
15*17*2VC
}
17 Output:
Response = tied input:
input 1 tied to output 3
18 19 20 21 22 23 24
01•01•01•01•02•12•12•00•00•00•00•00•01•08•15•16•Aud
25 26 27 28 29 30 31 32
no tied input
Each position shown in the response is an output: left = starting output (17), right =
starting output +15 (32). The number in each position is the input tied to that output.
In this example, preset 15, audio input 1 is tied to outputs 17, 18, 19, 20, and 29; input 2 is
tied to output 21; input 12 is tied to outputs 22 and 23; input 8 is tied to output 30; input
15 is tied to output 31; and input 16 is tied to output 32. No input is tied to output 24, 25,
26, 27, and 28.
N
X!
= Input number 00 – (maximum number of inputs for your model)
X@
= Output number 00 – (maximum number of inputs for your model)
X1$
= Global preset # 0 - 32, 10 maximum (0 = current configuration)