Extron Electronics MTPX Series User Guide - Manual (Page 38)

Operation, cont’d
MTPX Twisted Pair Matrix Switchers • Operation 3-12
PRELIMINAR
Y
4 . Press and release the Output 3, Output 4, and Output 8 buttons (figure 3-7).
N The entire set of ties can be canceled at this point by pressing and releasing the
Esc button. The Esc LED flashes once.
1 2 3 4 5
OUTPUTS
6 7 8 ENTER PRESET
Press and release the Output 3, Output 4,
and Output 8 buttons.
The LEDs blink to indicate that the selected
video and audio input will be tied to these
outputs.
The Enter LED blinks to indicate
the need to confirm the change.
Figure 3-7 — Select the outputs
5 . Press and release the Enter button (figure 3-8).
ENTER
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-8 — Press the Enter button
The current configuration (figure 3-9) is now:
• Input 5 (video and audio) is tied to output 3, output 4, and output 8.
Input 5 (video/audio) tied
to outputs 3, 4, and 8
Input
Output
3
4
8
5
Video
Audio
Figure 3-9 — Example 1, final configuration