Extron Electronics VN-COMMANDER - Manual (Page 119)

I456GB issue 8 109
VN-COMMANDER User Guide Section 4: Viewing a Presentation
To apply a solid color to the button...
~
Click on the Color button.
The standard Windows Color dialog will appear.
~
Select a pre-defined color from the Basic Colors palette
or define a custom color, then click the OK button.
~
Click OK button on the Change Button
Properties dialog to apply the chosen color.
To apply an image to the button...
~
Click on the Bitmap Manager button.
The Bitmap Manager dialog will appear.
~
Click on an image name in the Available Bitmaps
list, then click the OK button.
If there are no bitmaps listed or you want to add a new
bitmap, refer to page 111.
~
Click the OK button on the Change Button Properties
dialog to apply the chosen image.
To hide or show the button...
~
If you need to temporarily hide the button during run
mode, select the Hide? checkbox.
The edge color of a button is determined by the color
applied to the whole button and this will still be visible
even when an image is used. To improve the appearance
of the button,
first apply a color to the button that
matches the color of the image, then apply the image.