Extron Electronics VN-COMMANDER - Manual (Page 21)

VN-COMMANDER User Guide Section 1: Getting Started
I456GB issue 8 11
Setting the IP Address
(Windows NT)
~
Right-click on the Network Neighborhood icon on
the Windows desktop.
~
From the popup menu that appears choose Properties.
The Network dialog box will appear.
~
Select the Protocols tab then, in the Network
Protocols list, double-click the TCP/IP Protocol.
The TCP/IP Properties dialog box will appear.
~
Select the IP Address tab, click on the 'Specify an IP
address' option and type-in the required IP Address
and Subnet Mask.
HINT: Remember that you can, if preferred, change the IP
Address of the VN-QUANTUM Processor to suit that of
the computer.
For further information and advice on choosing these
values, refer to ‘Appendix A – IP Addressing’.
~
Click on the OK button to action the changes (or
Cancel to retain the existing settings).
~
Restart the computer to implement the new settings.