Extron Electronics VN-COMMANDER - Manual (Page 56)

Section 2: System Configuration VN-COMMANDER User Guide
46 I456GB issue 8
To create VN-QUANTUM Source Types...
~
Right-click on the Display Processors item.
~
A number of options are presented.
- Create Quantum Sources:
This option will simply add a list of the supported source
types to the source tree. You will then need to create source
definitions as described in the next few pages.
- Detect sources:
Selecting this option is the easiest method to create source
types. For correct operation, you should have a VN-
QUANTUM processor connected to the VN-COMMANDER
control PC. VN-Commander communicates with the
Quantum processor and automatically detects the number
and type of input cards that are present. The source type list
will be built automatically. If sources are connected to the
processor, then the source definition will be created
automatically.
- Update sources:
Selecting this option when connected to a VN-QUANTUM
processor will cause the source tree details to be updated.