Extron Electronics VN-COMMANDER - Manual (Page 57)

I456GB issue 8 47
VN-COMMANDER User Guide Section 2: System Configuration
To create a Source Definition...
~
Right-click on the appropriate source type heading in
the source explorer (e.g. RGB, Glimpse, Video, etc.)
~
Select Create New Source from the popup menu.
An empty source definition will appear in the workspace. For example, a new
Video definition will look like this:
~
Enter a name for the source in the Source Name field.
~
If a serial string is required for this source (e.g. to operate an external
switcher), type the appropriate control string into the Source Selected TX
field.
~
Enter the required settings for the source in the Parameters area – these
settings vary according to the source type and are detailed on pages 50 thru
66.