Extron Electronics VN-COMMANDER - Manual (Page 152)

Appendix C: Access Control VN-COMMANDER User Guide
142 I456GB issue 8
Changing Role Passwords
By default the password for each operator role is the
same as the role name. For example, for the User role, the
password is User. Please note that passwords are
case-sensitive,
i.e. If the password is ‘User’, entering ‘user’
or ‘USER’ will not be recognized.
It is recommended that the default passwords are
changed as soon as possible after installation. A password
can contain any standard keyboard letters, numbers or
symbols and may be any length.
Passwords can only be changed by an Administrator,
following the procedure on page 139.