Extron Electronics VN-COMMANDER - Manual (Page 19)

VN-COMMANDER User Guide Section 1: Getting Started
I456GB issue 8 9
~
Click the windows Start button and right-click on the
My Network Places icon.
~
From the popup menu that appears choose
Properties.
The Network Connections window will appear.
~
Right-click on the Local Area Connection icon.
~
From the popup menu that appears choose Properties.
The Local Area Connection Properties dialog box will appear.
~
In the list of loaded components double-click on the
Internet Protocol (TCP/IP) entry.
The Internet Protocol (TCP/IP) Properties dialog box will appear.
~
Click on the 'Use the following IP address' option
and type-in the required IP Address and Subnet Mask.
HINT: Remember that you can, if preferred, change the IP Address
of the VN-QUANTUM Processor to suit that of the computer.
For further information and advice on choosing these values,
refer to ‘Appendix A – IP Addressing’.
~
Click on the OK button to action the changes (or
Cancel to retain the existing settings).
~
Restart the computer to implement the new settings.
Setting the IP Address
(Windows XP)