Brickcom OSD-200 20xp - Manual (Page 41)

37
 HTTPS port
The default setting of HTTPS Port is 443; the setting range is from
1024 to 65535.
NOTE- Be aware to choose the different port from the one
set for the web server port.
e. IPv6 Address Configuration
With IPv6 support, users can use the corresponding IPv6 address for
browsing. Enable IPv6 by checking the box and click on <Save> to
complete the setting.
7.3.2 QoS
The QoS (Quality of Service) setting can be found under this path:
System> Network> QoS.
QoS allows providing differentiated service levels for different types of
traffic packets, which guarantees delivery of priority services especially
when network congestion occurs. Adapting the Differentiated Services
(DiffServ) model, traffic flows are classified and marked with DSCP
(DiffServ Codepoint) values, and thus receive the corresponding
forwarding treatment from DiffServ capable routers.
A. DSCP Settings
The DSCP value range is from 0 to 63. The default DSCP value is 0,
which means DSCP is disabled. The IP Camera uses the following QoS
Classes: Video, Audio and Management.
a. Video DSCP
The class consists of applications such as MJPEG over HTTP,
RTP/RTSP and RTSP/HTTP.
b. Audio DSCP
This setting is only available for the IP Cameras that support audio.