Brickcom OSD-200 20xp - Manual (Page 78)

74
M.E. is a standard mechanical operation. As the Dome Camera
tilts to the maximum angle, it will pan 180°, and then continue
tilting to keep tracking objects.
 Image Mode
IMAGE represents digital IMAGE FLIP, which enables users to
keep tracking objects seamlessly; under the mode, almost no
delay occurs in comparing with that under the M.E. mode.
E. Speed by Zoom
Enable this function to adjust the pan/tilt speed automatically by internal
algorithm when zooming. The larger zoom ratio leads to the lower
rotating speed. Click on <Set> button to save the setting.
F. ICR Function
With the IR cut filter, the camera can still catch clear image at night time
or in low light conditions.
 Auto
In the Auto mode, the internal circuit will automatically determine
whether to remove the IR cut filter according to the image
brightness level.
 On
Select the item to enable the IR cut filter.
 Off
Select the item to disable the IR cut filter.
9.11 Camera - Misc 2
(Miscellaneous Setup Menu 2)
The Miscellaneous Setting Menu 2 can be found under this path: PTZ>
Camera- Misc 2.