Brickcom OSD-200 20xp - Manual (Page 59)

55
B. Terminating Micro SD / SDHC Card Recording
Select <Disable> to terminate the recording function.
7.13 Schedule
The Schedule setting can be found under this path: System> Schedule.
This function allows the users to setup schedules for features including:
<Alarm Switch>, <Motion Detection> and <Network Failure Detection>. The
function supports up to 10 sets of time frames in the time frame list.
A. Setting Schedules
To set a schedule, please select a time frame from the time frame list
first. Then check the boxes from below to choose the specific
weekdays. At last, type in the start time (hour:minute) and the duration
time (hour:minute) for activation of the schedule triggered features. The
setting range for the duration time is from 00:00 to 168:59. Click
<Delete> to delete a chosen time frame. Please click on <Save> to
save the setup.
NOTE- Users MUST select <By schedule> under each feature
setting page to enable the schedule function.