Brickcom OSD-200 20xp - Manual (Page 42)

38
c. Management DSCP
The class consists of HTTP traffic: Web browsing.
NOTE- To enable this function, please make sure the switches /
routers in the network support QoS.
7.3.3 SNMP
The SNMP (Simple Network Management Protocol) setting can be found
under this path: System> Network> SNMP.
With Simple Network Management Protocol (SNMP) support, the IP
Camera can be monitored and managed remotely by the network
management system.
A. SNMP v1 / v2
a. Enable SNMP v1 / v2
Select the version of SNMP to use by checking the box.
b. Read Community
Specify the community name that has read-only access to all
supported SNMP objects. The default value is “public”.
c. Write Community
Specify the community name that has read / write access to all
supported SNMP objects (except read-only objects). The default
value is “write”.
B. Traps for SNMP v1 / v2
Traps are used by the IP Camera to send massages to a management
system for important events or status changes.
a. Enable Traps
Check the box to activate trap reporting.
b. Trap address