Brickcom OSD-200 20xp - Manual (Page 57)

53
A. Device information
When users insert the Micro SD / SDHC card, the card information
such as the memory capacity and status will be shown at Device
Information section.
When the memory card is successfully installed, the memory card
status shall be shown at <Device information> section in the Storage
Management page.
B. Device setting
Click on the <Format> button to format the memory card.
C. Disk cleanup setting
Users can enable automatic recordings cleanup by specifying the time
and storage limits.
D. Recording List
Each video file on the Micro SD / SDHC card will be listed in the
Recording list. The maximum file size is 60 MB/per file.
When the recording mode is set as <Always> (consecutive recording)
and the Micro SD / SDHC card recording is also allowed to be enabled
by events triggered, once events occur, the system will immediately
implement events recording to the memory card. Then the IP Camera
will return to the regular recording mode after events recording.
a. Remove
To remove a file, select the file first, and then click on the <Remove>
button.
b. Sort
Click on the <Sort> button, and the files in the Recording list will be
listed in name and date order.
NOTE- The capital letter A/M/R appears in the very beginning of
name denotes the sort of the recording: A stands for Alarm; M stands
for Motion; R stands for regular recording.