Brickcom OSD-200 20xp - Manual (Page 73)

69
corresponding fields respectively. Click on the <Set> button to save the tilt
angle settings.
NOTE- The tilt angle range is between -10° to +100° when the Flip
function under Misc 1 setting page is set as <Off> or <M.E.>.
NOTE- The tilt angle range is between -10° to +190° when the Flip
function under Misc 1 setting page is set as <Image>.
9.7 Privacy Mask
The Privacy Mask can be found under this path: PTZ> Privacy Mask.
The Privacy Mask function aims to avoid any intrusive monitoring. When
setting a mask, it is suggested to set it at least twice bigger (height and width)
than the masked object. The Dome Camera will assume the center of the
selected view as a starting point. Therefore, please keep the target object /
region nearly positioned in the center of the scene. Refer to the following
descriptions for setting a privacy mask.
NOTE- When the Privacy Mask function is enabled, the Flip function
under Misc 1 setting page will be disabled.
A. Mask Setting
 Switch
The Privacy Mask function can be activated or disabled. Click on
<Set> to save the setting.
 Transparency
The Privacy Mask can be set as transparency if necessary.
 Color
Select a desired color from the <Color> drop-down list for the
specified Privacy Mask. Click on <Set> to save the Privacy
Mask
’s color properties.
 Mask