CHIEF Short Throw Interactive Series - Manual (Page 19)

Installation Instructions WM210-220-230-240S/SI
19
3. Remove two 8-32 x 3/8" Phillips pan head screws (AB) from
lower cover. (See Figure 44)
Figure 44
4. Install two 8-32 x 3/8" button head security screws (AA) into
lower cover. (See Figure 45)
Figure 45
5. Replace upper cover and install two 8-32 x 3/8" button head
security screws (AA) into upper cover. (See Figure 46)
Figure 46
Stop Bracket
1. Remove two bolts holding stop bracket in place on
underside of short throw projector mount. (See Figure 47)
Figure 47
3 (AB) x 2
Lower
cover
6 (AA) x 2
7 (AA) x 2
x 2 1
Stop bracket