AMX Mio Modero R-4 User Manual
Page 16
Advertising
Customized Keypads
8
Mio Modero R-4
7.
If necessary, push out the standard buttons from the front of the top assembly.
8.
Place the new keypad in the top assembly and verify the alignment with the guide posts on the PCB.
9.
Place the top assembly back down on the PCB and turn the unit over again, exposing the 6 screw
points.
10.
Tighten the 6 screw points.
11.
Install the battery, replace the battery door, and slide the door to lock it in place.
Advertising