Checking the gateway ip address, Checking the gateway eui address, Checking the extended pan id – AMX Mio Modero R-4 User Manual
Page 34: Changing the device number
Protected Settings Menu
26
Mio Modero R-4
Checking the gateway IP address
1.
Select Protected Settings in the Setup Menu.
2.
Select System Settings in the Protected Settings Menu. The gateway IP is indicated on the second
page.
3.
Select the Back button until you are out of the Setup Menu.
Checking the Gateway EUI address
1.
Select Protected Settings in the Setup menu.
2.
Select System Settings in the Protected Settings Menu.
3.
Select the device’s down arrow to navigate to the second page. The Gateway EUI address is
indicated on the second page.
4.
Select the Back button until you are out of the Setup Menu.
Checking the Extended PAN ID
1.
Select Protected Settings in the Setup Menu.
2.
Select System Settings in the Protected Settings Menu.
3.
Select the device’s down arrow to navigate to the second page. The Extended PAN ID is indicated at
the bottom of the page, above the Network Scan and ZigBee Statistics buttons.
4.
Select the Back button until you are out of the Setup Menu.
Changing the Device Number
1.
Select Protected Settings in the Setup Menu.
2.
Select System Settings in the Protected Settings Menu.
3.
The Device Number button at the bottom of the first page lists the current NetLinx Device Number
for the unit.
4.
To change the device number, press the Device Number button to open the Device Number page.
5.
Enter the new device number with the device keypad.
To move the cursor back one number at a time, press the Back button.
To clear the entire device number field, press the Clear button.
To return to the System Settings page without saving any changes, press the Abort button.
To save any changes and return to the System Settings page, press the Done button.
6.
Reboot the Mio R-4 from the Reboot Page (see the Reboot Page section on page 29).
7.
Select the Back button until you are out of the Setup Menu.
In addition to the Abort button, should you decide not to change the Device Number
for any reason, press the Back button (FIG. 1) to return to the last page displayed.