AMX Mio Modero R-4 - Manual (Page 18)

Device Setup Pages
10 Mio Modero R-4
Project Information
The Project Information page displays information specific to the TPDesign4 remote file currently
located on the Mio R-4. Use the up and down arrows to scroll from viewable page to page.
Viewing Project Information
1. Select Project Information from the Setup Menu.
2. Use the Up/Down touchscreen arrows to view each page.
3. When finished, select the Back button until you are out of the Setup Menu.
FIG. 5 Mio R-4 Project Information Pages
Project Information
File Name The name of the file as it was created in the designing application.
Designer ID The ID of the designer for the control pages.
File Revision The revision number for the control pages.
Dealer ID The ID of the dealer associated with the control pages.
Job Name A friendly name for the job associated with the control pages.
Sales Order The sales order number for the job.
Purchase Order The purchase order number for the job.
Build Number The current build version number for the device firmware.
Charger Sensor Port The port number for the charger sensor.
Charger Sensor

Channel
The channel number for the charger sensor.
Creation Date The date the control pages were created.
Revision Date The date of the last revision for the control pages.
Last Save Date The date of the last save for the control pages.
Job Comments Any additional comments added in the designing application.