AMX Mio Modero R-4 - Manual (Page 19)

Device Setup Pages
11 Mio Modero R-4
Remote & Display Settings
The device provides you with information concerning current displays settings and allows you to edit the
timeout and brightness. Use the up and down arrows to scroll from viewable page to page.
FIG. 6 Remote & Display Settings Pages
Remote & Display Settings
Display Timeout The valid display timeout times are 0, 10, 15, 20, 25, and 30 seconds.
Sleep Timeout The valid sleep timeout times are 0, 3, 5, 10, 15, 30, 60, 120, 180, and 240

minutes.
LCD The current brightness of the touchscreen display, between 0 and 100.
Charge LED The current brightness of the LED displaying charging status, between 0 and 100.
Home Hold Time The amount of time (in seconds, 0-6) in which the selected home page will be

displayed.
Inactivity The amount of time (in minutes, 0-240) spent inactive in its charging cradle before
the unit switches to its inactivity page.
Inactivity Page The selected page displayed when the inactivity timer expires.
Panel Type The type of unit connected to the ZigBee network. This is always R4.
Firmware Version The most current firmware version uploaded to the unit.
ZigBee Version The most current version of the ZigBee module firmware uploaded to the device.
S/N The device serial number
Setup Pages Version The current version of the Setup pages uploaded to the unit.
Power-up Page The page displayed when the unit powers up.
File System The total and available amounts of storage space in the unit.
RAM The total amount of available RAM in the unit.
Setup Port The port (usually 0) used to upload information to the unit.