Sound settings, Setting the volume, Testing the sound settings – AMX Mio Modero R-4 User Manual
Page 25
Device Setup Pages
17
Mio Modero R-4
Sound Settings
The device can provide an audible indicator of both hit and miss of button selections.
Setting the volume
1.
Select Sound Settings from the Setup Page.
2.
Select the Up and Down arrow under Volume to increase or decrease the sound volume by one
setting. The settings are Mute, Low, Medium, and High.
3.
Select the Back button until you are out of the Setup Menu.
Testing the sound settings
1.
Select Sound Settings from the Setup Page.
2.
Select either the Mute, Button Hit, or Button Miss button. The button will turn green when
properly selected.
3.
Push Play Test to test the sound and the volume.
4.
Press the Mute button again until it is no longer green.
5.
Select the Back button until you are out of the Setup Menu.
FIG. 9
Sound Settings Page
Sound Settings
Volume
Adjusts the volume of the sound.
Mute
Silences any button sound.
Play Test
Plays a test tune consisting of a single octave of the musical scale.
Button Hit
Enables or disables the sound of a correctly chosen button.
Button Miss
Enables or disables the sound of an incorrectly chosen button.
The Mio R-4 will allow the Mute button to be selected along with the Button Hit or
Button Miss buttons. In this case, the Mute button overrides any sound produced by
any of the other buttons.