ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 15)

Specifications
Goldeye Technical Manual V2.5.0
15
Cooling Goldeye P-008 SWIR Cool only:
Peltier cooled
+0 °C stabilized
ADC 14 bit
Digital interface Gigabit Ethernet, IEEE 802.3 1000BASE-T
Smart features Manual gain (up to factor 10 at short exposure times), built-in correction
data sets, gain/offset correction (NUC/non-uniformity) for each pixel,
bad pixel correction, background (FPN) correction, continuous mode
(image acquisition with maximum frame rate), image on demand mode
(triggered image acquisition)
With AVT‘s AcquireControl software: pseudo color LUT with several color
profiles, auto contrast, auto brightness, analyze multiple regions
(rectangular, circle, ring, line) within the image, plus statistics and
histogram
Power requirements +12 V (-0% / +5%)
Goldeye P-008 SWIR: 0.6 A (during camera start-up: inrush current
≥ 4 A for 20 ms, capacitive load < 2000 μF)
Goldeye P-008 SWIR Cool: 1.1 A, max. 2.8 A (during camera start-up:
inrush current ≥ 4 A for 20 ms, capacitive load < 2000 μF)
Dimensions Goldeye P-008 SWIR: 89 mm x 90 mm x 71 mm (L x W x H)
Goldeye P-008 SWIR Cool: 116 mm x 90 mm x 99 mm (L x W x H)
each model incl. connectors, without tripod and lens
Mass Goldeye P-008 SWIR: 660 g
Goldeye P-008 SWIR Cool: 1420 g
Operating temperature Goldeye P-008 SWIR: +10 °C to +30 °C ambient temperature (without
condensation)
Goldeye P-008 SWIR Cool: 0 °C to +40 °C ambient temperature (without
condensation)
Storage temperature -30 °C to +70 °C ambient temperature (without condensation)
Relative humidity
(operating and storage) 10 % to 95 % without condensation
Regulations CE, RoHS (2011/65/EU)
Feature Specification
Table 3: Specification Goldeye P-008 SWIR / Goldeye P-008 SWIR Cool