Camera interfaces, Control connector, Chapter – ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 37
Camera interfaces
Goldeye Technical Manual V2.5.0
37
Camera interfaces
This chapter gives you information on the control junction, inputs and outputs
and trigger features.
Control connector
Camera I/O connector pin assignment (15-pin
D-sub connector)
This connector is intended for the power supply as well as for controlling the
camera by the user.
Furthermore, some output signals are available, showing the camera state.
Note
Timing specifications in this chapter are valid:
•
starting SN 00102 (P-032)
•
SN 00308 (P-008)
•
For older versions: contact AVT Technical Support.
www
For accessories such as cables see:
Pin Signal
Direction
Level
Description
1
External Power
+12 V DC (-0%
/ +5%)
Power supply
max. 2.8 A (Goldeye P-
008...)
max. 1.3 A (Goldeye P-
032...)
depending on model
2
3
External GND
4
5
---
Reserved
(do not connect)
6
---
Reserved
(do not connect)
7
RxD
In
RS232
8
TxD
Out
RS232
Table 18: Camera I/O connector pin assignment (Goldeye xy-...)