ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 85)

Appendix
Goldeye Technical Manual V2.5.0
85
| | method.
| +-------f: Operation mode during image
| integration. See bit field "b" of
| parameter U=<p8> for description.
+-----------g: Offset calculation method for the
background correction (M=<p16>).
0 -> Set M=<p16> to the mean value of
the newly captured background
correction image.
1 -> (IRC-320/600, Pearleye P-007/030
only:) Set M=<p16> to a linear
interpolated value depending om
the current camera temperature.
See parameter q=<p8> for
correction data file.
k=<p16> : Start the automatic calibration function. Depending on the
value of j different correction mechanisms are applied
to improve image quality. The parameter U may be affected,
too.
k=0 : Calibrate one-time.
k=<1..FFFF> : Start the calibration every k*256 frames.
l=1 : List contents of the flash file directory.
m=<p8> : (IRC-320/600, Pearleye P-007/030 only:)
Operation mode of the temperature drift compensation.
A linear compensation term n*T + o + p is added
to the pixel data to correct a drift depending on the
temperature T. The temperature T is measured internally.
Slope and offset of the linear term are controlled by n=<p16>
and o=<p16>. Changing this parameters may void ex factory
calibration.
<000f_000m>
| |
| +---m : Operation mode.
| 0 -> Deactivated.
| 1 -> Drift compensation activated using
| the temperature measured internally.
| Please note: not all camera models
| are equipped with a temperature
| sensing feature.
+--------f : Bypass the filtering of internally measured
temperature.
0 -> Filter is enabled.
1 -> Filter is bypassed.
n=<p16> : (IRC-320/600, Pearleye P-007/030 only:)
Slope n of the linear drift compensation
term n*T + o. The value specifies the slope in counts per °C
and is represented in 10.6 bits fixed point two's complement
notation. See parameter m=<p8> for more details about drift
compensation. Changing this parameter may void ex factory
calibration.
o=<p16> : (IRC-320/600, Pearleye P-007/030 only:)
Offset o of the linear drift compensation
term n*T + o. The value specifies an offset in counts and is