ALLIED Vision Technologies Goldeye P-032 SWIR - Manual (Page 40)

Camera interfaces
Goldeye Technical Manual V2.5.0
40
Exposure output (pin 12, 13)
The exposure output indicates the active exposure time of the sensor in the
image-on-demand operation.
After end of exposure the 256 (Goldeye xy-008) or 508 (Goldeye xy-032) lines
of the sensor are read out to the digital output.
Line-sync output (pin 14)
The line-sync output (active low) supplies approx. 900 mV at a termination with
75 ohms.
Figure 11: Exposure output diagram
Caution

The current that flows through the optocoupler should not
exceed 20 mA (at 12 V, R
v
 600 ).
Figure 12: Line-sync output diagram
Goldeye xy-008 Goldeye xy-032
32 μs
2.5 μs
5 Vss
(no-load operation)
63.8 μs
2.5 μs
5 Vss
(no-load operation)