ALLIED Vision Technologies Goldeye P-032 SWIR User Manual
Page 77
Goldeye Technical Manual V2.5.0
77
Example
Integration of 32 images simultaneously to the output of the actual integration
image and copy as a reference image
A into the correction data memory
(c=1, b=6, a=1) => ccbbba = 011101 [binary] = 0x1D. As soon as the integration
is terminated, you have to wait for at least two image cycles, before the copy
procedure is finished.
>
H=1D[CR]
...wait for at least 36 image cycles (34 + 2 frames jitter buffer, 0.9 seconds at 40
images / sec.) or poll the state of bit group
d with Y=1...
H 0
Operation Mode
Integrator/Image Store
F
E
D
C
B
A
9
8
7
6
5
4
3
2
1
0
-
-
-
-
-
-
-
-
d
-
c
c
b
b
b
a
ro
rw rw rw rw rw rw
Bit group
Value (hex)
Description
a
0
Output: deactivated. Data are passed through transparently.
1
Output: activated. Output of actual image storage content.
b
0
Integration: deactivated. The image storage content is not changed.
1
Integration: 1 image. The following image is copied into the image
storage.
4
Integration: 8 images. The following 8 images are integrated and the
result is copied into the image storage.
5
Integration: 16 images. The following 16 images are integrated and the
result is copied into the image storage.
6
Integration: 32 images. The following 32 images are integrated and the
result is copied into the image storage.
7
Integration: 64 images. The following 64 images are integrated and the
result is copied into the image storage.
c
0
Copy: deactivated.
1
Copy: Target A. The image storage content of the integrator is copied
into the correction data storage as low reference image of the two point
correction
2
Copy: Target B. The image storage content of the integrator is copied
into the correction data storage as high reference image of the two
point correction
d
0
Integration completed. (This value can only be read out.)
1
Integration still running. (This value can only be read out.)
Note: The Integration is activated by change of the register content of bit group x of
H. If e.g.
directly following the integration of 64 images a further integration of 64 images is started,
another value has to be written into the register first.
Example:
H=E, H=0, H=E.
Table 42: Integrator and image store: values