Fluid Components International ST100 Series Foundation Fieldbus - Manual (Page 11)

ST100 Series Foundation Fieldbus
Fluid Components International LLC 9
INDEX PARAMETER DATA TYPE (LENGTH) INITIAL VALUE DESCRIPTION
34 WRITE_LOCK Unsigned8 1
35 UPDATE_EVT DS-73
36 BLOCK_ALM DS-72
37 ALARM_SUM DS-74
38 ACK_OPTION Bit String 0
39 WRITE_PRI Unsigned8 0
40 WRITE_ALM DS-72
41 ITK_VER Unsigned16
42 FD_VER Unsigned16 1
43 FD_FAIL_ACTIVE Bit String 0
44 FD_OFFSPEC_ACTIVE Bit String 0
45 FD_MAINT_ACTIVE Bit String 0
46 FD_CHECK_ACTIVE Bit String 0
47 FD_FAIL_MAP Bit String
48 FD_OFFSPEC_MAP Bit String
49 FD_MAINT_MAP Bit String
50 FD_CHECK_MAP Bit String
51 FD_FAIL_MASK Bit String
52 FD_OFFSPEC_MASK Bit String
53 FD_MAINT_MASK Bit String
54 FD_CHECK_MASK Bit String
55 FD_FAIL_ALM DS-87 0;0;0,0;0;0;0;15;0;0
56 FD_OFFSPEC_ALM DS-87 0;0;0,0;0;0;0;16;0;0
57 FD_MAINT_ALM DS-87 0;0;0,0;0;0;0;17;0;0
59 FD_FAIL_PRI Unsigned8 0
60 FD_OFFSPEC_PRI Unsigned8 0
61 FD_MAINT_PRI Unsigned8 0
62 FD_CHECK_PRI Unsigned8 0
63 FD_SIMULATE SIMULATE_FD 0;0;1
64 FD_RECOMMEN_ACT Unsigned16 0
Process Data Transducer Block
This block connects the ST100 sensor process Variable values and engineering units to the blocks output channels. The ST100 process variables are
Flow, Temperature, Totalizer, and Pressure. Not all of these variables are available in all members of the ST100 family of products.
PRIMARY_VALUE parameter
This parameter makes available to the AI block the flow value of the ST100. Flow is organized into 3 classes; volumetric, mass, and velocity.
Each class has its associated valid engineering units. Confirm that units match the flow class.