Fluid Components International ST100 Series Foundation Fieldbus - Manual (Page 21)

ST100 Series Foundation Fieldbus
Fluid Components International LLC 19
ST100 Pressure Analog Input Block
INDEX PARAMETER DATA TYPE (LENGTH) INITIAL VALUE DESCRIPTION
1 ST_REV Unsigned 16 0
2 TAG_DESC OctString(32) Spaces
3 STRATEGY Unsigned 16 0
4 ALERT_KEY Unsigned 8 0
5 MODE_BLK DS-69 O/S
6 BLOCK_ERR Bitstring(2)
7 PV DS-65 ST100 PRESSURE value from the
trasnducer block
8 OUT DS-65 ST100 PRESSURE value available
to other function blocks.
9 SIMULATE DS-82 Disable
10 XD_SCALE DS-68 0 - 100%
11 OUT_SCALE DS-68 0 - 100%
12 GRANT_DENY DS-70 0
13 IO_OPTS Bitstring(2) 0
15 CHANNEL Unsigned16 0 The Channel needs to be set to
"Pressure average"
16 L_TYPE Unsigned 8 0
17 LOW_CUT Float 0
18 PV_FTIME Float 0
19 FIELD_VAL DS-65
20 UPDATE_EVT DS-73
21 BLOCK_ALM DS-72
22 ALARM_SUM DS-74
23 ACK_OPTION Bitstring(2)
24 ALARM_HYS Float
25 HI_HI_PRI Unsigned 8
26 H_HI_LIM Float
27 HI_PRI Unsigned 8
28 HI_LIM Float
29 LO_PRI Unsigned 8
30 LO_LIM Float
31 LO_LO_PRI Unsigned 8
32 LO_LO_LIM Float
33 HI_HI_ALM DS-71
34 HI_ALM DS-71
35 LO_ALM DS-71
36 LO_LO_ALM DS-71
XD_SCALE parameter
This parameter sets the high and low scale values, the units index, and the number of digits after the decimal point, for display purposes.